VC3P

VC3P

13001

The switch disconnectors of the VC3P series are a series of switch disconnectors that allow the opening and closing of low voltage electrical circuits.

They are used in the sector:

  • Power plants
  • Data centers
  • Production facilities
  • Agricultural structures

Critical lighting and conditioning systems for mass transport hubs

  • Airport runway
  • metropolitan
  • Car parking

Guaranteed continuity of public services

  • Water pumping stations
  • Waste water treatment plants
  • Telecommunications

Buildings (backup electricity, lighting, sprinklers, elevators, etc.)

  • Hospitals
  • Shops and shopping centers
  • Hotels and restaurants
  • Sports arenas and stadiums
  • Private residences
Choose Rated current
Choose poles
Choose the handle
 

_GENERALITIES

VISUALCOMPACT P is a range of switch disconnectors suitable for making and breaking on load and disconnecting low voltage electrical circuits. They are commonly used for the following purposes:

  • Main switch
  • Switch for motors
  • Disconnector
  • Safety switch

They are available in 6 sizes and 20 current ratings.

_General Characteristics

  • Rated insulation voltage 1500 v ac and 1500 v dc
  • 3 - 4 - 6 - 8 Poles available
  • High breaking capacity (ac-22, ac-23, IEC 60947-3)
  • High electrical and mechanical endurance
  • Double break contacts
  • Self cleaning contacts
  • Contact position positively reliable indicated by the handle
  • Visibility of fixed and moving contacts by means of windows
  • Independent manual operation
  • Neutral contact makes earlier and opens later than the phase contacts
  • Solid neutral version available
  • Neutral at full current until 1250 a, standard, 1600 a ÷ 3150 a on request
  • Suitable protection to prevent accidental touching 
  • of live parts
  • Casing in self-extinguishing (v0), low hygroscopic and high mechanical resistance 
  • Isolating material resistant to damp heat
  • Wide range of accessories
  • Rotary front operation by means of: external double insulated handle with door-interlock in on position, IP65 degree of protection. Padlockable with three padlocks in off position
  • Direct handle (padlockable in off position on request)

_NORMAL SERVICE, MOUNTING AND TRANSPORT CONDITIONS

  • Storage and transport ambient temperature - 25°c + 55°c
  • Working ambient temperature - 20°c + 40°c
  • In case of higher ambient temperature (ta) consider the following derating formula:
  • IThe = k ITh where K = 1 - t40/100
  • Relative humidity max 95%
  • Rated frequency 50 - 60 hz
  • Altitude max 2000 m a.S.L.
  • Pollution degree 3 according IEC 60947-1
  • Can be mounted in any position, for what concerns the positioning, please refer to the installation instructions
  • Mounting in enclosure: in case of utilisation at full load and without adequate ventilation, ensure a volume of about 5 times the volume of the switch
  • Duty (IEC 60947-1): 8 hours; uninterrupted; intermittent 60% class 30; temporary; periodic.

For different operating conditions, please contact the manufacturer.

_CONFORMITY TO STANDARDS

IEC 60947-1|IEC 60947-3|UNI EN 60947-1|UNI EN 60947-3

_CERTIFICATES AND APPROVALS

KEMA|RINA|ENEL codice 13.32.23|A2A|CESI|IENGF

8 other products in the same category:

Product added to wishlist

iqitcookielaw - module, put here your own cookie law text